Specific operation steps of automatic bottle blowing machine
Release time:
2024-04-09
Specific operation steps of automatic bottle blowing machine 1. When operating the bottle blowing machine, the preform should be placed in the preform container first, and then the conveying device in the machine will automatically enter the automatic positioning device according to the preform, and then the preform mouth is facing up, loaded onto the preform holder and sent to the drying tunnel.
Specific operation steps of automatic bottle blowing machine
1. When operating the bottle blowing machine, the preform should be placed in the preform container first, and then the conveying device in the machine will automatically enter the automatic positioning device according to the preform, and then the preform mouth is facing up, loaded onto the preform holder and sent to the drying tunnel.
2. After heating, the preform will be sent to the blowing and stretching platform for mold locking. After low-pressure and high-pressure blowing and stretching, the gas will be exhausted and the mold will be opened. Then people can take the formed bottle off the platform of the fully automatic bottle blowing machine.
The mineral water bottle blowing machine is mainly used for blowing mineral water bottles. It can blow plastic particles or finished bottle embryos into bottles through certain process means, which brings convenience for people to use plastic bottles of various shapes in life. The bottle blowing machine mainly adopts oil-free air bag clamping technology to operate. It not only has a large clamping force, but also has less force on the toggle operation and a long life. When people use the bottle blowing machine, how should they operate it to make it easier and more convenient to use and extend the service life of the bottle blowing machine?
1. When people are using the bottle blowing machine, they should carefully check whether the power supply, control system, heating system, etc. of the bottle blowing machine are in normal condition, and for the parts that need to be lubricated, they need to add an appropriate amount of lubricating oil to ensure the normal use and operation of the equipment.
2. When using the bottle blowing machine, the mold should be accurately installed on the bottle blowing machine. The button should be carefully checked to see if it is in the correct position. It is also necessary to start, debug or operate it in accordance with the specified requirements to ensure that the machine is running and working normally.
这里是标题一h1占位文字
Hot information
Get Best Quote:
Fenghuang Intelligent Industrial Park, No. 8 Jifu Road, Zhangjiagang City,Jiangsu , China
Pay attention to Eceng machinery
Get Best Quote